York compressor mounting bracket

For anyone considering mounting a York 2or 2onto your Series Land Cruiser, you first need this bracket. YORK 2CONVERTED COMPRESSOR. ENDLESS ON-BOARD AIR SYSTEMS PROVIDE ENOUGH AIR TO . Com sells pre-made mounting brackets for a variety of engines. The kit is designed to work with the ever popular .

Mounts the stock Truck or F-Body alternator near the stock truck location. I havent been able to find the thread about an on board air project, where there was a link to a place that sold a bracket to mount a york. This is a universal mounting bracket and requires a bit of messing about. York compressors were fitted to the 3and some 4engined Interceptors. Therold Enterprises makes mounting brackets and alternator pulleys to mount an AMC York onto a current Jeep 4- or 6-cyl engine.

Also make sure to grab the mounting bracket and about a foot of the hose connected to the compressor … makes life a lot easier mounting and . This bracket is a great starting place to build your engine driven compressor mounts off of.

The mounting holes are slotted to tune your belt alignment as well as . L Cummins Engine with Intercooler. I am running my alternator in the top . Sanden Compressor Mount Kit for 8. The axial compressors are easiest to mount , because of their alternator style mounting. UNIVERSAL COMPRESSOR MOUNT TO SUIT. SANDEN SD7HSD5HSD50. Remove the alternator mounting bracket.

Includes mounting bracket hardware. Prepare the York Bracket by installing the tensioner to the lower mounting face. Bracket , Compressor Drivers Side, Wide Mount , Low Hood Clearance.

Also, I may need some help identifying the . Onboard Air - Installing the York air compressor on board our 460. An adapter plate is used to. Jeep Wrangler JKU Rubicon OBA with York.

Just remove the old compressor while leaving its stock bracket in place. Put a York air compressor under the hood and hit the road. Air Compressor Bracket , Steel, Natural, Converts York Bracket to . The compressor is also fairly inexpensive. But, most likely, a bracket will have to be made to mount the compressor to the engine because there . This is the compressor I have and would like to make onboard air.

Bottom of compressor still has standard mounting holes for York mounts. Question has to do with the bracket that supports a vertically mounted York AC compressor to the intake.